One of the most famous companies that come to your mind when it comes to technology and electronics would be Sony. Sony is one of the best companies in the world, among these products the most popular and reliable would be the TV in the present time.
Though every product has flaws followed with it, although Sony TVs are the best, there could be problems such as not turning on, glitches, etc. Sony TVs have been in the market for more than a decade, and there are not many complaints.
The main problem over time is the Sony TV not turning on, which can be resolved using various tricks that will be followed in the article right now. The question is, how to fix a Sony TV not turning on? If a Sony TV is not turning on, the first thing to do is to check that all the connectors are connected perfectly to the TV.
If yes, then you should try power resetting the TV; when the TV is not connected to any power source, you should press the power on button for a couple of minutes. Then plug the TV back into a power source; this is a simple solution if the TV is not damaged in any way or in another case, this might not work, so here are the reasons for a Sony TV to not turn on.
The Reasons For A Sony TV To Not Turn On.
- The TV May Not Turn On Because Of Power Surging.
- The TV Is Not Plugged In Correctly.
- Due To a Damaged HDMI Cable Or Port.
- The Software Is Out Dated.
- The TV Is Overheating.
Let us briefly discuss the reasons causing the TV to not turn on,
#1. The TV May Not Turn On Because Of Power Surging:
Many a time, the TV has a straightforward problem due to the power given to it by the power source; in simple words, a TV needs a fixed amount of power to work.
If the power supplied to it is more or less than the fixed, then there would be mishaps to the Sony TV. This problem is most likely to happen as there is a high possibility that the power would fluctuate or the power plug of the TV is not properly fixed.
#2. The TV Is Not Plugged In Correctly:
Most often, your Sony TV isn’t correctly connected, or there may be an issue with the surge defender or expansion you are utilizing. In this situation, you should simply check your TV’s power cable, guaranteeing that it is connected on the two sides.
Whenever you’ve connected it correctly, take a try at turning on your TV. If that will not help in the issue, check your power surge defender or extension for glitches.
You can disconnect the TV from the surge defender or expansion and connect a device you are certain is working. On the other hand, you can detach the TV and connect it straightforwardly to a wall switch.
You must be sure that all the wires are connected properly to the Sony TV. In other possibilities, the HDMI connector could not turn on, or other connectors could have died.
#3. Due To a Damaged HDMI Cable Or Port:
If a TV’s plugin port or the HDMI cable is broken or faulty, then it may cause the TV to get caught with glitches or other problems, like the screen being disturbing or a pitch-blank screen.
Whenever a TVs parts are broken or damaged, the screen might not show anything or may come up with a “No Input Signal” sign, which suggests that the TV is not in the best condition. There are simple solutions available for such an issue, which will be covered in the second half of the article.
#4. The Software Is Out Dated:
One more reason why your Sony TV won’t turn on could be a direct result of an incomplete update or pending installation of an update. The latest Sony TVs accompany by LED lights that will come with a colored tone while getting another update.
On the other chance, that is the situation; you simply have to hold on until it completions to use in your TV back many more times. Do remember that the TV shouldn’t be turned off during the time of update, or it can cause serious issues to the TV, and the TV may not turn on forever, so be careful about any step you take.
#5. The TV Is Overheating:
The worst possible problem a TV could have would be a damaged motherboard; though this scenario is a rare sight to watch, it is mainly caused due to overheating issues in a TV.
Overheating is another reason why your Sony TV would not turn on. A Sony TV indicates the overheating problem by LED light found inside the screen, which blinks a red light around eight times when the TV is turned on or tried to turn on.
Such cases happen most of the time due to no proper ventilation for the TV to get good airflow. So try to keep the TV in a place where the airflow is good, and it is not enclosed by many objects, or it may still be unable to get airflow.
How to Fix a Sony TV That Is Not Turning On:
There are many ways to fix a Sony TV that is not turning on; given fixes below are some of the most reliable and efficient ways to repair a TV.
- Check That Your Sony TV Is Connected Properly.
- Examining Power Issues With Other Attachments.
- Use The Power Button On Your Remote Or TV.
- The Energy Saving Switch Should Be Turned On.
- Check For The Blinking Lights.
Let’s begin with the solutions and explain them briefly one-by-one,
#1. Check That Your Sony TV Is Connected Properly:
The most common problem for any TV, be it any company, the problem is a loose connection or the wire of the TV not properly connected. This issue is the simplest among all others.
This issue can be resolved by ensuring that the TV cord is correctly connected to the power outlet, and you need to be also sure about the power outlet and whether it is working properly by using any other device which needs a power source.
If you use a power surge or a stabilizer to connect the TV to the power source, then remove it and directly connect the cable to the wall outlet. If the TV turns on, then there might be an issue with a power surge, and you may need to replace it.
You need to be sure about every wire, even the power cable, which is connected on the other side to the TV plugin, and also check if the cable is damaged.
#2. Examining Power Issues With Other Attachments:
A drained remote battery or unplugged sockets are some of the reasons that your tv won’t power on. Given below are the reasons for quirky and bad experiences caused on a TV,
- The power button on the TV can be used if you are using the remote. A new remote control might be needed or a new battery for the old one.
- Check if the power cord is appropriately connected. Assuming the cable is removable, ensure that it’s rightly connected to your TV.
- Have a go at the power reset. This is ready by turning off the power cord and keeping it turned off for around two minutes. The further is explained in the next solution.
#3. Use The Power Button On Your Remote Or TV:
As explained in the above solution, the power reset could be a simple solution for many problems. It can be done in any instance, such as the TV not turning on or error in the settings, such as contrast issues.
The steps to be followed to complete a power reset for a Sony TV are,
- Unplug the power cable from the power source.
- Wait for a while; in this scenario, wait for about 1 or 2 minutes.
- Then plug back the power cord back into the power outlet, and be sure that it is connected properly and is receiving power by using other devices at the outlet.
- Be sure that your remote control has batteries with charge; if not, then replace them Immediately.
- If all the above circumstances are fulfilled, then try to turn the TV on either by the remote or the TV’s power button.
- Hold the power button for at least 10 or 20 seconds.
- The TV would turn on.
If the above step does not help, then there are other ways too.
#4. The Energy Saving Switch Should Be Turned On:
If you have a TV of the latest generation, then there is a pre-installed switch called an energy-saving switch. This switch is present as it suggests is to save energy or reducing the use of power.
If the TV is new, then your answer would be yes, then be always sure to keep the switch turned on as, when the switch is turned off, the power consumption is reduced to almost nothing.
This suggests that when the switch is off, the TV will receive almost no power, which tends the TV would not to turn on. You can find the button for this feature underneath the power-on button.
If it is off, then turn it on, then unplug the TV for a while, then turn the TV on, and this would probably fix the issue. The TV would surely turn on, if not then try other steps too.
#5. Check For The Blinking Lights:
All TVs nowadays come with an indicator in one or another way; for example, a laptop beeps to indicate there is a problem with it. In the case of TVs, it comes with a LED light indicator which blinks in case of any problem.
There are many light indicators, depending on each company. The Sony TV has mainly four light indicators, which are,
The question you ask would be what each of them indicates and how to solve the issues; here are what they indicate and their solutions,
A blinking red LED light implies that the TV has encountered a System Error. Most Red LED Errors require servicing. If the LED blinks multiple times, stops, then, at that point, flickers multiple times again in a cycle, then that point, this is an issue well defined for specific TV models.
This might be fixed by detaching the TV from the connection and trying out a power reset. The red light, in some cases, implies overheating, so try to keep the TV in a well-ventilated area or let the TV have better air circulation.
This has two meanings, either the TV is in a power cycle or a timer is activated, and the second might be the TV needs a software update, and it is been currently installing it. The chance that you can’t turn on your TV. What’s more, it has an Orange LED flickering. Simply wait for it.
Software installations may take time. It would be controlled back when the software installation is done; the TV would turn on by itself.
The white LED light does not indicate any problem; it is used to show that there are no problems with the TV, and it is just to indicate normal operation.
It will be seen when your TV is turned on and might come on after the TV is turned on. If a LED flickers, turning the TV on is not happening, redo the pattern, turn off the TV, and wait for a reset of power for 3 minutes.
Frequently Asked Questions(FAQs):
Why Is My Sony TV Unresponsive?
First, you unplug the main lead. Suppose your problem persists after using step 1. Then disconnect the main power plug of the tv and then press and release the power button on the TV. Wait for at least 2 to 5 minutes and plug in the power cord and turn on the tv.
How Do I Force Start My Sony TV?
Disconnect the tv from its main power supply and leave it alone for at least 2 to 5 minutes. Now you plug in the power cord again and turn on the power. If your tv does not turn on, then you can use the power button on the TV.
Why Is My TV Getting Power but Not Turning On?
Try unplugging the TV from the electrical outlet. While it is unplugged, hold down the power button on the TV itself for about 50 to 60 seconds. Once that time is up, release the button and plug it back into power. Power up the unit and see if you can see an image.
Why Is My Sony TV Screen Black?
The reason your sony tv screen goes black is when picture reset mode is set to on, and you unplug your tv power cord, then plug it back in and turn it on. The screen will return to normal when the calibration is complete in approximately 10 to 12 minutes.
Like this post? You May Also Enjoy Reading:
- Hulu Audio Out Of Sync | What to Do?
- How to Setup Samsung TV to WiFi Without Remote
- Vizio TV Sound Not Working | How to Fix in Seconds
- Panasonic TV Red Light Blinking | How to Fix in Easy Method
- How to Fix Samsung Smart Hub Not Working Problem? | Quick Fix
If the solution to the problem of your TV is not given in the article, there might be a high chance that the TV would need services from professionals.
If none apply to your TV, the best bet would be to contact the Sony service executives, which is your last option. If the executive too cannot repair the TV, the best would be to buy a new Television.